1.TJ-V65 machining center machine tool parameters
控制系统 | 三菱M80 |
驱动马达 | 主轴马达 7.5KW X轴 2.0KW Y轴 2.0KW Z轴 3.0KW |
行程 | X 轴行程 600 MM Y 轴行程 500 MM Z 轴行程 500 MM |
主轴 | 主轴转速 12000r/15000r 直接式 主轴孔锥度 锥度 BT40 主轴鼻端至工作台距离 120-670MM 主轴中心至立柱轨面距离 520MM |
XYZ轴快速移动 | 48/48/48 m /min |
切削进给速度 | 1-10 m/min |
XYZ轴定位精度 | ±0.005/300 |
XYZ轴重复定位精度 | ±0.003/300 |
工作台 | 工作台面积 750mm×450mm 工作台载重量 450 KG |
刀库 | 刀臂式刀库 BT40-24T 换刀时间 T-T:1.8S(就近换刀) 刀具最 大尺寸 φ100×200 mm 刀具最 大重量 7kg |
护罩 | 全护罩 标准颜色 |
机械占用面积及高度 2200*2400*2500 mm 机械约重量 5000kg |
2. Common configurations of machine tools
序号 | 项目 | 制造商 | 原地 | 规格 |
1 | 控制系统 | 三菱 | 日本 | 三菱M80 |
2 | 主轴马达 | 三菱 | 日本 | 7.5KW |
3 | 三轴马达 | 三菱 | 日本 | 2.0/2.0/3.0KW |
4 | 主轴 | 普森/惟隆 | 台湾 | BT40 12000/15000转 直接式 |
5 | 四瓣爪 | 普森/惟隆 | 台湾 | BT40-45° |
6 | 三轴滚珠丝杆 | THK/力士乐 | 德国/日本 | R36/R36/R36-16P |
7 | 三轴线性导轨 | THK/力士乐 | 德国/日本 | R35/35/35滚柱线轨 |
8 | 轴承 | NSK/FAG | 日本/德国 | 25TAC62B-P4级 |
9 | 联轴器 | R+W | 德国 | EK2/35/20 |
10 | 打刀系统 | 喜拿卡 | 台湾 | BPF-10U12N70FA |
11 | 风路系统结合电磁阀 | 金器 | 台湾 | MVSC-220-4E1 |
12 | 主轴冷却系统 | 瑞科 | 合资 | RCL-240 |
13 | 电气箱热交换器 | 瑞科 | 合资 | RCL-310 |
14 | 切削冷却马达 | 斯特尔/格兰富 | 台湾/丹麦 | CBK4-30/20 |
15 | 三点组合 | 金器 | 台湾 | MAP3000 |
16 | 其他气压元件 | 金器 | 台湾 | AC3000L |
17 | 主接触器 | 三菱/施耐德 | 日本/法国 | SN-65 |
18 | 断路器 | 三菱/施耐德 | 日本/法国 | NFC60-SMX |
19 | 继电器 | 和泉/施耐德 | 日本/法国 | RU2S-D24 |
20 | 开关电源 | 明伟/施耐德 | 台湾/法国 | DC24V-150/100W |
21 | 中央润滑系统 | 俑田 | 台湾 | TM-302FW |
22 | 手轮 | 东测 | 日本 | HC121 |
23 | 线材(耐油线) | 新光 | 台湾 |
3. Standard accessories
NO. | Specification | quantity |
1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
| Spindle cooling system Tool cooling series Full protective cover Automatic lubrication system working lamp Adjust pads and bolts Chip bin water tank Electric cabinet heat exchanger toolbox | 1 1 1 1 1 6 1 1 1 1 |
4. Mechanical features:
1. Use Taiwan oil-proof wire: This wire is mainly used in the CNC machine tool industry for oil resistance. The wire will not harden or break when soaked in oil for a long time. After long-term use, the machine tool has good performance and low failure rate, which enhances the service life of the machine tool line.
2. Use Taiwan's Double Force cutting cylinder: The cutting force of this cutting cylinder can reach 4 tons, which is three times the power of ordinary cutting cylinders, which can improve the tool changing speed and stability of the machine tool.
3. Use Taiwan’s double filter; the filter has an automatic drainage function and a secondary filtration function, which can purify the water in the machine tool’s air path for a second time. It can also enhance the air pressure function of the machine tool and reduce the air path failure of the machine tool.
4. Main accessories: The electrical appliances used in the power distribution of our company's machine tools are the same as those of Ningxia Mazak accessories (same supplier). The handwheel adopts the original Japanese Dongze brand, the oil pump adopts Danish Grundfos and Saiyang oil-proof panels, and other small All accessories use national standard accessories to enhance the durability of the machine tool.
five. After-sales service commitment
1. Our company promises that the machines sold by our company will have a free warranty period of one year under normal use (except for man-made damage or force majeure).
2. Our company guarantees that customer service will respond by phone within four hours after reporting for repair. (Within Guangdong Province) If the problem cannot be solved by phone, we guarantee that service personnel will be on hand to repair the problem within 24 hours (except for force majeure reasons such as transportation).
3. Our company's installation and debugging period for the machine shall not exceed ten days (except for reasons caused by the customer). If the machine still cannot work normally after more than fifteen days, the customer has the right to request a replacement of the machine. If the machine still cannot work normally after the replacement, the customer has the right. Request to exit.
4. Our company provides free technical support and procurement consultation to customers in the purchase and selection of other accessories for the equipment (such as knives, cutting tools, etc.).
5. Our company guarantees to provide operating skills training and necessary maintenance training for customer operators, and provides lifelong technical support services. During the warranty period, we will provide no less than 2 machine non-fault detection services and propose reasonable maintenance plans.
6. Our company guarantees that the machines produced and sold by our company will enjoy lifetime maintenance services and technical support. All costs during the warranty period will be free of charge (except for man-made and natural damage). Outside the warranty period, service fees and original parts fees will be charged appropriately.
Telephone:
13924674697(Zheng Minzhu) / 0755-28497596
Mail:
303813672@qq.com
Address:
No. 72-2, Fuchengao Industrial Avenue, Pinghu Street, Longgang District, Shenzhen
139-2467-4697
Mobile website QR code