Precious CNC milling machine

Purpose CNC milling machine uses

This machine tool is suitable for high-precision and efficient automatic processing of medium and small parts.

Main structural features

●Adopt Kunming Taizheng lathe;

●Equipped with Taiwan's high-precision milling head and motor 2.2KW/3HP;

●The worktable has a wide rectangular guide rail in the Y/Z direction, a dovetail guide rail in the

●Automatic lubrication.

Performance features:

A practical CNC milling machine, including a bed, transmission and gearbox, lifting table, and workbench. The milling head component is installed on the front and upper end of the bed, the longitudinal feed mechanism is installed on the right side of the workbench, and the front end of the lifting table is It is equipped with a transverse feed mechanism and a CNC device on one side of the bed. This structure is novel and compact in design; it can realize three-axis, four-axis and five-axis linkage of , drilling and other parts.

After years of independent research and development, the company has developed a CNC milling head that fully meets the requirements for finishing or heavy cutting. At the same time, the body structure has also been greatly changed, and the accuracy of the entire machine tool has been greatly improved. The specific advantages are as follows:

1. Change of machine head

The Taiwan spindle used can maintain accuracy for a long time.

The sleeve moves up and down using ball screws and pre-tensioned structures to ensure Z-axis accuracy.

All three axes use servo motors, which ensure faster movement and more reliable accuracy.

The spindle motor is 3HP and the low speed and high torque brought by the transmission gear transmission are suitable for heavy cutting.

2. Changes in arm extension

All models have a fixed arm structure, which is more rigid.

3. Changes in lubrication system

The whole machine lubrication (machine head, body) is switched to electric-automatic timing lubrication.

4. Enhanced electrical reliability

The main electrical components of the whole machine are all imported components to ensure the durability of the normal operation of the product.

5. Protection and water-blocking devices

The lifting table is equipped with a telescopic protective cover to protect the track surface.

Large water trays, large water baffles on both sides of the bed, and waterproof covers on the work surface effectively control coolant recovery.

The above-mentioned CNC milling machine can not only perform heavy cutting, but also finish machining. The accuracy of the machine tool can be retained for a long time. It is especially suitable for batch processing of copper, aluminum and other parts and abrasive processing.